23 OCT 2025 - We are back! If you have been following us over the last few years, you will know that the last 2 months have been rough. We website was practically not loading. Sorry for the mess. We are back though and everything should run smoothly now. New servers. Updated domains. And new owners. We invite you all to start uploading torrents again!
TORRENT DETAILS
Udemy - NREL Phase VI Wind Turbine CFD Analysis And Validation
TORRENT SUMMARY
Status:
All the torrents in this section have been verified by our verification system
You will learn to use SolidWorks, Spaceclaim, ICEMCFD and Fluent to make CFD analysis of Horizontal Axis Wind Turbine
What you'll learn
Simulate the NREL Phase VI wind turbine case
Student will be able to simulate any type of wind turbine after attending this course
You will acquire skills in creating CAD model of horizontal axis wind turbine
You should be able to get accurate results for NREL Phase VI using skills taught in this course and also any other wind turbine
Requirements
Good understanding of using ANSYS (ICEMCFD, Spaceclaim, Fluent) and solidworks software. Although we will start from scratch but some basic working knowledge will be highly helpful.
Computer with at least 32 GB RAM and i7 processor with good graphics card.
LED monitor with size of 23 inch or more preferably 29 inch to properly visualize the results.
Basic knowledge of wind turbine theory
Basic knowledge of CFD and application on some simple CFD problems such as Airfoil or flat plate CFD
If You Need More Stuff, kindly Visit and Support Us -->> https://CourseWikia.com
Get More Tutorials and Support Us -->> https://FreeCourseWeb.com
We upload these learning materials for the people from all over the world, who have the talent and motivation to sharpen their skills/ knowledge but do not have the financial support to afford the materials. If you like this content and if you are truly in a position that you can actually buy the materials, then Please, we repeat, Please, Support Authors. They Deserve it! Because always remember, without "Them", you and we won't be here having this conversation. Think about it! Peace...
VISITOR COMMENTS (0 )
FILE LIST
Filename
Size
~Get Your Files Here !/1. Introduction/1. Introduction to course.mp4
27.8 MB
~Get Your Files Here !/1. Introduction/1. Introduction to course.srt
5.7 KB
~Get Your Files Here !/1. Introduction/1.1 Martin O. L. Hansen - Aerodynamics of Wind Turbines (2008, Earthscan).pdf
3.3 MB
~Get Your Files Here !/1. Introduction/1.2 NREL Phase VI_CFD.pdf
5.5 MB
~Get Your Files Here !/1. Introduction/1.3 NRELPHASEVI.xlsx
52 KB
~Get Your Files Here !/1. Introduction/1.4 Reneable Energy.pdf
1.6 MB
~Get Your Files Here !/1. Introduction/2. Brief overview of course.mp4
45.9 MB
~Get Your Files Here !/1. Introduction/2. Brief overview of course.srt
5.8 KB
~Get Your Files Here !/1. Introduction/3. Problem Description.mp4
133.7 MB
~Get Your Files Here !/1. Introduction/3. Problem Description.srt
18.6 KB
~Get Your Files Here !/1. Introduction/4. Data extraction from graph.mp4
23.6 MB
~Get Your Files Here !/1. Introduction/4. Data extraction from graph.srt
3.5 KB
~Get Your Files Here !/1. Introduction/s809_Airfoil/s809.xlsx
18.6 KB
~Get Your Files Here !/1. Introduction/s809_Airfoil/S809_Airfoil.txt
1.3 KB
~Get Your Files Here !/1. Introduction/s809_Airfoil/S809_practice.txt
1.3 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/1. S809 airfoil coordinates.mp4
22.6 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/1. S809 airfoil coordinates.srt
3.1 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/10. Creating transition and base support for NREL Phase VI wind turbine blade.mp4
104.7 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/10. Creating transition and base support for NREL Phase VI wind turbine blade.srt
12.5 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/2. Understating flow angles in wind turbine.mp4
95.4 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/2. Understating flow angles in wind turbine.srt
20.8 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/3. Importing S809 coordinates into Solidworks 2020.mp4
66.6 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/3. Importing S809 coordinates into Solidworks 2020.srt
11.4 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.mp4
50.4 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.srt
8.6 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/5. Creating point at 30% chord length for defining rotation axis.mp4
37.6 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/5. Creating point at 30% chord length for defining rotation axis.srt
6.2 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/6. Creating square trailing edge.mp4
22.5 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/6. Creating square trailing edge.srt
3.9 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/7. Creating 21 plans at given radial locations for the blade section.mp4
56.9 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/7. Creating 21 plans at given radial locations for the blade section.srt
6.5 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/8. Creating 21 airfoils on 21 plans with given twist angle and chord length.mp4
58.1 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/8. Creating 21 airfoils on 21 plans with given twist angle and chord length.srt
9.3 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/9. Creating blade section from 21 section using Loft command in Solidworks.mp4
40.5 MB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/9. Creating blade section from 21 section using Loft command in Solidworks.srt
5.8 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/s809_Airfoil/s809.xlsx
18.6 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/s809_Airfoil/S809_Airfoil.txt
1.3 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/s809_Airfoil/S809_practice.txt
1.3 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_finalmodel.SLDPRT
626 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step1.SLDPRT
118.3 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step2.SLDPRT
146.9 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step3.SLDPRT
211.3 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step4.SLDPRT
193.2 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step5.SLDPRT
189.5 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step6.SLDPRT
476.4 KB
~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step7.SLDPRT
510.3 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.mp4
20.8 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.srt
3.6 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/10. Making a symmetric model of full wind turbine.mp4
25.5 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/10. Making a symmetric model of full wind turbine.srt
6.3 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.mp4
57.9 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.srt
12.1 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/3. Creating assembly of full wind turbine including hub.mp4
85.8 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/3. Creating assembly of full wind turbine including hub.srt
15.2 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/4. Setting origin on the back side of hub of wind turbine model.mp4
24 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/4. Setting origin on the back side of hub of wind turbine model.srt
5.1 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/5. Creation of inner domain.mp4
53.7 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/5. Creation of inner domain.srt
8.9 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/6. Creation of outer domain.mp4
85.9 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/6. Creation of outer domain.srt
11.7 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/7. Named selection for inner and outer domains.mp4
28.3 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/7. Named selection for inner and outer domains.srt
7 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/8. Changing display properties and colors of geometry in spaceclaim.mp4
45.6 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/8. Changing display properties and colors of geometry in spaceclaim.srt
8.8 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/9. Making surfaces from solid body.mp4
7.2 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/9. Making surfaces from solid body.srt
1.7 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/inner.scdoc
1.2 MB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg.scdoc
243.7 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg_twobladeshub.scdoc
459.4 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_inner.scdoc
461.7 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_outer_Domain1.scdoc
42 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_outer_Domain2.scdoc
40.4 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_outer_Domain3.scdoc
38.5 KB
~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/outer.scdoc
217 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/1. Introduction.mp4
36.7 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/1. Introduction.srt
8.1 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/10. Defining mesh sizes on other parts.mp4
31.7 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/10. Defining mesh sizes on other parts.srt
3.7 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/11. Setting maximum elements size in Global mesh setup.mp4
13.5 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/11. Setting maximum elements size in Global mesh setup.srt
2.1 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.mp4
88.1 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.srt
13.2 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/13. Deleting volume mesh (Octree).mp4
6 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/13. Deleting volume mesh (Octree).srt
1.2 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/14. Smoothing surface mesh to improve mesh quality.mp4
9.9 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/14. Smoothing surface mesh to improve mesh quality.srt
1.9 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/15. Creating volume mesh using Delaunay method.mp4
37.2 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/15. Creating volume mesh using Delaunay method.srt
5.5 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/16. Density box for mesh refinement - Introduction to density box creation.mp4
58.4 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/16. Density box for mesh refinement - Introduction to density box creation.srt
6 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/17. Density box for surface mesh refinement on interface 3.mp4
100.7 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/17. Density box for surface mesh refinement on interface 3.srt
13.8 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/18. Density box Refining Volume mesh in wake region of wind turbine.mp4
62.1 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/18. Density box Refining Volume mesh in wake region of wind turbine.srt
6.9 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/19. Mesh types in ICEMCFD and definition of Prism meshing.mp4
20.2 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/19. Mesh types in ICEMCFD and definition of Prism meshing.srt
6.1 KB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/2. Importing geometry of inner domain into ICEMCFD.mp4
22 MB
~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/2. Importing geometry of inner domain into ICEMCFD.srt
