10 JUL 2026 - Back up to full speed! Let's be honest: for the last few months, TorrentFunk was painfully slow. Pages crawled, searches dragged, and just loading the site tested everyone's patience. We hunted the problem down to our network and rebuilt it from the ground up — smarter caching, a much bigger and faster connection, and a lot of fine-tuning under the hood. The difference is night and day: the site now loads in a fraction of a second. No more waiting around. Thanks for sticking with us through the slow spell. Now go discover your funk!
Plastic has unique properties not shared by other materials, and
injection molding has a number of constraints that must be
accommodated in the design process. These constraints are
different from other manufacturing techniques like 3D printing and
subtractive manufacturing. As a result, if you're designing
something that will eventually be created in plastic,
considering the complexities of manufacturing in your design
process is critical. You'll need to learn how to do things a bit
differently than you would for other materials and
processes. In this course, learn how to design for injection
molding even when using additive manufacturing to create a
prototype in plastic using Fusion 360. Instructor Thom
Tremblay explains how to create a form, complete and
visualize your design, set it up for 3D printing, all while
designing a ready-to-manufacture part.
VISITOR COMMENTS (0 )
FILE LIST
Filename
Size
1.Introduction/01.Welcome.en.srt
1.3 KB
1.Introduction/01.Welcome.mp4
4.2 MB
1.Introduction/02.What you should know.en.srt
1.4 KB
1.Introduction/02.What you should know.mp4
1.8 MB
1.Introduction/03.Managing data.en.srt
3.2 KB
1.Introduction/03.Managing data.mp4
5.8 MB
1.Introduction/04.Setting preferences.en.srt
4.6 KB
1.Introduction/04.Setting preferences.mp4
9 MB
2.1. Creating a Form/05.Creating a T-Spline body.en.srt
8.8 KB
2.1. Creating a Form/05.Creating a T-Spline body.mp4
18.3 MB
2.1. Creating a Form/06.Editing a T-Spline body.en.srt
12.3 KB
2.1. Creating a Form/06.Editing a T-Spline body.mp4
31.1 MB
2.1. Creating a Form/07.Creating a solid from the T-Spline.en.srt
10.7 KB
2.1. Creating a Form/07.Creating a solid from the T-Spline.mp4
29 MB
3.2. Completing the Design/08.Adding internal features.en.srt
11.3 KB
3.2. Completing the Design/08.Adding internal features.mp4
29.2 MB
3.2. Completing the Design/09.Applying draft.en.srt
6.1 KB
3.2. Completing the Design/09.Applying draft.mp4
19.8 MB
3.2. Completing the Design/10.Fillets.en.srt
4.7 KB
3.2. Completing the Design/10.Fillets.mp4
12.8 MB
4.3. Visualizing the Design/11.Rendering.en.srt
10.6 KB
4.3. Visualizing the Design/11.Rendering.mp4
25.8 MB
4.3. Visualizing the Design/12.Collaboration.en.srt
4.2 KB
4.3. Visualizing the Design/12.Collaboration.mp4
7.9 MB
5.4. Producing the Design/13.Setting up for 3D printing.en.srt
4.3 KB
5.4. Producing the Design/13.Setting up for 3D printing.mp4
